* EZ10K Tuttnauer Kwiklave Automatic Autoclave with printer


With the simplicity of one touch design all your sterilization and drying needs are fulfilled. The Tuttnauer EZ10K, with printer fully automatic autoclave will fill, sterilize, exhaust and dry at the touch of a button. Don't forget the Chamber Brite! Chamber size is 10" x 19", printer optional. This is the perfect autoclave in a practice that needs fast turn around of instruments for a high volume practice.

EZ10K Kwiklave Features:

  • Closed door active drying system to maintain sterility and ensure efficient drying of packs and pouches.
  • Stand-by warm up mode ensures autoclave is ready to go at any time.
  • High efficiency air pump forces and circulates hot air after the sterilization cycle is complete for fast drying.
  • New brighter and easier to read control panel.
  • Hepa filter 0.2 µm air filter (replaceable).
  • Pre-loaded cycles for: unwrapped instruments, wrapped/packs, glassware (slow exhaust for liquids) and additional drying cycle.
  • All program parameters can be customized and stored for greater flexibility
  • The Automatic shut off at the end of both the sterilization and dry cycles. No need to worry about setting the dry cycle.
  • Audible and visual cycle interruption alerts lessens downtime
  • Double safety locking device prevents door from opening while chamber is under pressure
  • The Low water sensor prevents activation of sterilization cycle when there is insufficient water in the chamber or reservoir to prevent overheating and burning of instruments
  • Constant monitoring of temperature and pressure for sterilization.
  • Power outage recovery system.
  • Door design prevents steam from coming in contact with control panel.
  • Optional internal printer documents: date, time, temperature and pressure.
  • 510k clearance for dental handpieces.
  • Drain valve is located on the front, allowing for quick and easy draining of water reservoir.
  • International certifications


  • 6 Gallon 10" x 19" Chamber
  • Holds 3 Full and 3 Half Standard Cassettes
  • Cold Start Cycle Time: 21 Minutes
  • Hot Start Cycle Time: 11 Minutes
  • Adjustable to 273°F (134°C) and 30 PSI
  • Overall Size: 21.5" x 20" x 14.4"
  • Voltage required is 220V and 235V for proper operation
  • 50/60 Hz

What You Get:

  • New EZ10K Autoclave
  • 4 Trays
  • ChamberBrite Autoclave Cleaner
  • Tray Holder
  • Drain Tube
  • Operations Manual

Please see our Terms and Conditions for warranty information.